|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
b Note � When you connect your camcorder to the wall socket, [A.SHUT OFF] is automatically set to [NEVER].
COMMANDER
For
GON OFF
TRV238E/438E/ TRV285E:
Select when using the Remote Commander supplied with your camcorder. Select to deactivate the Remote Commander to prevent your camcorder from responding to a command sent by another VCR remote control unit.
b Note � The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes.
DISPLAY
GLCD V-OUT/LCD Select to show the displays such as the time code on the LCD screen and in the viewfinder. Select to show the displays such as the time code on the TV screen, LCD screen, and in the viewfinder.
REC LAMP
GON OFF Select to turn on the camera recording lamp on the front of your camcorder during recording. Select this setting in the following recording situations. The camera recording lamp will not light up during recording. � When you do not want the subject to be nervous about being recorded. � When you are recording close to the subject. � When the subject reflects the recording lamp.
Customizing Your Camcorder
VIDEO EDIT
For TRV270E/285E: You can select up to 20 scenes (programs) and record them in the desired order to another recording device such as VCR (p. 67).
Customizing Your Camcorder
59
|
|
|
> |
|
