The manual was made available promptly. I is a clean scan of the original. I had no problem downloading it. The scan was well centered and cleanly formatted. It is as good a product as can be had without being the original document.
Received downlink in less then 8 hours, Item was in good copy condition, and told me how to program the clock timer. The price was very resonable, and the process was very automated and was GREAT to work with.
I was very pleased with the manual I got for my amateur (ham) radio. Without it I could not figure out how to input and/or change the P/L setting on my radio. It drove me nuts as the radio was essentially useless. That all changed when my manual came. Then it took only minutes and I was done. Now my radio works fine. This is an exceptionally good resource as it's a very easy and user friendly download. Thank you very much! Dziękujemy za!
It answered my question, which was how to load the paper. I did notice that the very end of the manual was not visible.
Text excerpt from page 8 (click to view)
(Continued)
Installation of the surround speakers:
Example: When installed on the wall Wall 60 - 90 cm (23" - 35") If possible, mount the surround speakers on the wall. lnstall them 60 - 90 cm (23" - 35") above the height of your ears when you are seated, if possible.
Example: When installed vertically
s To mount the surround speakers on the wall
3.2 mm (1/8") 5 mm (3/16") The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the left.
Min. 22 mm (7/8")
9 mm (3/8")
1
Drive one screw into the wall for each speaker as shown in the illustration.
1
5 mm (3/16")
q Make sure that both the screw and the wall can support a load of 20 kg (45 lbs.). q Drive the screws, so there is about a 5 mm (3/16") space between the wall and the head of the screw.
Wall mounting screw Wall surface Min. 17 mm (11/16")
2
Mount the surround speaker on the wall so that the screw head is inserted into the slot on the surround speaker.
2
Wall surface
Note: When the surround speakers are installed vertically, the speaker badge will be upside down. In this case, you can adjust the badge to face the proper direction. Just turn it by hand.
Badge
s Removing the speaker grilles
(Front speakers only)
1 2
Remove the lower part of the speaker grille first. Remove the upper part of the speaker grille.
q Only the grills on the upper woofers are removable. Caution: When the speaker grilles are removed, the speaker diaphragms are exposed. Make sure nothing comes into contact with the speaker diaphragms.
s Mounting the speaker grilles
Fit the four posts on the speaker grille into the mounting holes and push them lightly with the palm of your hand to secure.
