|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual I purchased was exactly what I needed to repair my Toshica television. The manual contained schematics and troubleshooting information that was very helpful.
;
Il download del Service Manual JVC HR 4100 non é stato eseguito
 ;
The Service Manual was just as expected, complete with schematics and I was able to download it in less than an hour after I ordered it. The only problem with these is that the schematics are hard to read due to the small font. I could remedy this by printing them on a larger printer.
;
Very fast, clear and usefull site !
Also this Service Manual are very well maked and with a very good definition !
Very fast download speed !
Recomended Seller !
;
The manual you sent me was excellent. It included clear, readable diagrams and a usable parts list. I would surely use your service again. Thanks
CD-C811W/821W
� Check the tracking system.
Check waveform of IC1 pin 7 (TE). The waveform shown in Fig. 44-1 appears, and no-disc state appears soon. Tracking servo is inoperative. Yes Check the periphery of IC 1 pin 8 to pin 15, and IC 5 to CNP2.
Yes
Play is possible in TEST mode.
Yes
The unit will be initialized in Normal mode,but it will not playback..
Yes
Normal jump is impeded, and the program top cannot be reached.
5ms 1.00 V IC1 7 TE
Yes
Check the periphery of IC 1 pin 14.
Data cannot be read. Yes
Check the VCO-PLL system.
4
5 ms 5.0 V IC1 54 DRF
3
Figure 44-1 � Checking the spin system.
Play operation is performed without disc.
The turntable rotates a little. No The turntable fails to rotate or rotates at high speed.
Yes
The spin driver circuit is normal.
Yes
Check the periphery of IC1 pins 23 to 27, pin 39, and pin 40, IC2 pin 12 and pin 13, IC3 to CNP3.
� Checking the VCO-PLL system
Play operation is performed when disc exits. Yes Although HF waveform is normal, TOC data cannot be read. Yes Check PDO waveform (Fig. 44-2). Abnormal Check the IC1 pins 43 and 44, IC2 pins 3, 5, 7, 10, and 11.
Stop --> Play As VCO frequency is locked at 4.32 MHz, voltage of PDO rises and stabilizes. 2
0.5s 1.00 V IC2 3 PDO 0.5s 1.00 V IC1 16 FD
3
� Although HF waveform is normal and the time indication is normal, no sound is emitted.
Check IC2 pin 48 (EFLG). Yes Check IC2 pins 37, 40. Abnomal Check IC401 and POWER AMP. IC601. No
Figure 44-2
Usually, the number of pulses of flawless disc is 100 pulses/sec or less.
� 44 �
|
|
|
> |
|
