|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
CD-E250E
System connections (continued)
! To mount the surround speakers on the wall
The design of the surround speakers allows them to be hung on the wall. Be sure to use the type and size of screw that is shown to the right.
Min. 22 mm (7/8") 9 mm (3/8") 3.2 mm (1/8") 5 mm (3/16")
! Connecting the AC power lead
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode. Notes: " Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time. " Never use a power lead other than the one supplied. Otherwise, a malfunction or an accident may occur.
1
Make a hole in the wall using a drill.
! Demonstration mode
32 mm (1-1/4") 8-9 mm (3/8")
The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll. To cancel the demonstration mode: When the unit is in the power stand-by mode (demonstration mode), press the X-BASS/DEMO button. The demonstration mode will be cancelled and the display will disappear. To return to the demonstration mode: When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again. Note: When the power is on, the X-BASS/DEMO button can be used to select the extra bass mode.
2
Preparation for Use
Drive a wall mount plug into the hole using a hammer. Drive the wall mount plug in until it is flush with the wall surface. Drive one screw into the wall mount plug for each speaker. Drive the screws, so there is about a 5 mm (3/16") space between the wall and the head of the screw. Mount the surround speaker on the wall so that the screw head is inserted into the slot on the surround speaker.
Wall surface
3
Wall surface
Wall mounting screw
4
! To turn the power on
Press the ON/STAND-BY button to turn the power on. After use: Press the ON/STAND-BY button to enter the power stand-by mode.
Caution: The speaker may fall if mounted improperly. Check the stability of the wall thoroughly. Sharp is not liable for accidents caused by poor wall stability or improper mounting.
12
|
|
|
> |
|
