|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Complete MFG Service Manual at a good price FAST !
;
Downloaded the manual, reasonably straightforward, pretty much exactly as advertised.
 ;
very helpfull
circuit diagram and sparepart list available
;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
1
2
3
4
A
Notes on Replacement
Notes on replacing the Sheet SW
8 9
Mount the gear plate. Secure the gear plate, using the four screws. Gear plate
Place to adhere the Sheet SW
Notes: 1. Be careful not to warp the sheet SW. 2. Remove any dirt on the JOG holder to which the sheet SW is to be adhered. If some adhesive for the old sheet SW remains on the JOG holder, completely remove it with a cloth moistened with alcohol. 3. Do NOT place the sheet SW so that it is mounted on the rib of JOG holder 1000. 4. When adhering the sheet SW, be careful not to trap air bubbles in it. If air bubbles are formed, remove the sheet SW and adhere a new sheet SW. Do NOT reuse the removed sheet SW. 5. When making a connection, be sure to first release the lock of the connector then securely relock the connector after making the connection.
9 9 8
9
B
9
C
10 Remove the forced eject pin.
Forced eject pin
10
Sheet SW
D
11 Mount the cam plate. 12 Install the gear spring 200. 13 Mount the adjust plate. 14 Secure the adjust plate, using one screw.
Gear spring 200 JOG holder 1000 Rib
Place to adhere the SW cushions HH48/2
12 11
Adhere the cushions to the right and left of the engraved arrows (�) (12 positions in total) on the sheet SW.
E
Cam plate
14
Default value "0"
0
13
To increase the load
To decrease the load
+1 +2
-1 -2
SW cushion HH48/2
Engraved arrow
SW cushion HH48/2
-3
F
Note: For details on adjustment, see "Load Check mode for the JOG Dial."
Sheet SW Adjust plate
98
1 2
CDJ-1000MK3
3 4
|
|
|
> |
|
