|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
5
6
7
8
5 JOG section
A
1
Remove the control panel section. (See 1 Control panel section)
8 9
Remove the seven screws. Remove the MAIN PCB stay.
1 Remove the screw. 2_1 Remove the shield case. 2_2 Remove the connector. 3 Remove the three screws. 4 Remove the shield case 2. 5 Remove the four screws. 6 Remove the MAIN Assy. 7
Disconnect the some flexible cables at need. Remove the connector. Shield case Shield case 2
8 8 8 8
B
3 2_2
8 9 8 4 8
C
2_1
1 5
3 5
3
MAIN PCB stay
D
5
5
10 11
Remove the dial knob. Remove the slide knob. Dial knob MAIN Assy
10
E
11
Slide knob
F
CDJ-400
5 6 7 8
37
|
