|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Happy to find finally a schematic for this amplifier. The schematic is of good quality, the pcb layout is useless: all is black. Never the less, it is very easy to find the components on the board using the schematics.
;
Hard to find manual was ready the next day. Scans were very legible (including schematics). All the essential parts of the service manual were present (adjustment procedure, schematics, and parts list). It would have been nice if the rest of the manual was included (disassembly procedure, theory of operation, etc.).
 ;
The Service Manual for the Kenwood KR-V55R provided by owner-manuals.com was as described/advertised. The contents provided the necessary information to effect a diagnosis of the unit. The schematics above all else was instrumental in tracing the the signal flow from component to component.
;
This manual was the factory original. Excellent value and contained all the details I needed. Easy dowwnload provided the information when I needed it.
;
Impeccable, document très complet. Perfect, i get all i need. All schematic are correct. Thanks
5
6
7
8
(Pause) Pauses at the position. (Eject) In the playback state or stop state, perform the disc eject. (Audio Play) Audio playbacks the arbitrary music. It is necessary for this command that Player is set up beforehand. Please execute (Play) first. (Reject) Stop by the command. Examples: When audio playbacks at track 8 Press buttons of [8], [AUDIO], ([FUNC] and [7]) in order.
A
� Test operation command
It can control servo operation finely. Be careful not to damage the player by mistake the usage of test command. (Test/Normal Mode Change) [C-MODE] Switch the Test mode/Normal mode by [FUNC] and [3] buttons. Can use only commands of 7TM from 0TM in the test mode. (Servo All Off) During servo ON, turn all servos OFF when pressing the [0] and [TIME] buttons in order. (Focus On) During CD STOP, turns the LD ON when pressing [1] and [TIME] buttons in order, and perform the autofocus. (Spindle Kick, Tracking ON/Off) During tracking servo OFF, perform the spindle kick and turn the automatic adjustment processing and tracking servo ON when pressing [2] and [TIME] buttons in order. Also during tracking servo ON, turn the tracking servo OFF when pressing [2] and [TIME] buttons in order. (Tracking OFF) During tracking servo ON, turn the tracking servo OFF when pressing [3] and [TIME] buttons in order. (Slide FWD) During tracking servo ON, turn the tracking servo OFF and move the slider in the FWD direction when pressing [4] and [TIME] buttons in order. (Slide REV) During tracking servo ON, turn the tracking servo OFF and move the slider in the REV direction when pressing [5] and [TIME] buttons in order. (Search TR No.2) During CD STOP, perform the following operations when pressing [6] and [TIME] buttons in order. LD ON � Autofocus � Spindle kick � Automatic adjustment processing � Second tune search � Tracking servo ON When performed Tracking OFF, there is the case that cannot rise up in this command. In that case please repeat once again. (Pickup UP/DOWN) During CD STOP, turn the LD ON and move the pickup up and down when pressing [7] and [TIME] buttons in order. Do not close the focus. * When rise by a step with the test mode, input a command by pressing buttons of [0], [TIME], [1], [TIME], [2] and [TIME] in order.
B
C
D
E
F
CDJ-800
5 6 7 8
57
|
|
|
> |
|
