|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The purchased manual is an high-quality scan of the original JVC paper-based Service Manual. The Service Manual includes the Owner´s Manual, so you do not have to buy both of them.
 ;
It paid to find this Service Manual, couldn't find it anywhere else. Exactly what I wanted. Received within 24 hours.
;
Complete manual with clear schematic diagrams and printed circuit board layouts of two variants of the headset and the transmitter an old and a new version.
Also shows how the headset and the transmitter is opened and how transmitter and receivers can be adjusted and where to measure.
I had no problems to repair the headset using this service manual.
;
Excellent printing quality. A complete and very useful manual with all details.
;
This is a great site. I placed my order and by the next am it was available for download. Had some problems with some missing copy on some pages. Once I brought the error to the OMC's attention, the issue was resolved. I'll come back again.
MAGNET ASSY ALIGMENT
1. 2. 3. 4. 5. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit. Turn OFF the power, close the door, and while pressing the CLEAR and PLUS ONE buttons simultaneously, turn ON the power again. Press the CHECK button, and set the loading mode. Press the ) �� button and chuck the disc. Adjust the magnet assembly and magnet holder so that A=B as shown in the figure.
A
B
Magnet ASSY Screw (For adjustment) Magnet ASSY
Magnet holder
DISC HOLDER A ALIGMENT
1. 2. 3. 4. 5. 6. Check that there is no disc in the unit and then turn ON the power. Open the door, and set a disc in the PLUS ONE slit. Turn OFF the power, close the door, and while pressing the CLEAR and PLUS ONE buttons simultaneously, turn ON the power again. Press the CHECK button, and set the loading mode. Press the ) �� button and chuck the disc. Press ) �� or �º 0 button to stop the disc holder A slightly away from the disc. Rotate and adjust the adjusting screw so that the center of the disc and that of the disc holder coincide.
Disc holder A
Screw (For adjustment)
Disc Disc
Disc holder A
ab
a=b
� 17 �
|
|
|
> |
|
