WHIRLPOOL CDU510
Owner's Manual

Loading
� � � �

Tips
� � � � � Place all items in the racks so they are separated ing the center of the racks. Wedge flat, lightweight items next to the silverware or along the sides and back of the racks. and ba:

Scrape off bones or large food particles. Remove excessive quantities of greasy/oily substances, Scrape or soak items with burnt on foods as they require more energy than the rest of the load to clean, Scrape off tomato based food soils. If connected to a food waste disposer, make certain the disposer is empty before starting the dishwasher. This allows proper draining, Mustard, mayonnaise, vinegar, lemon and other acidic foods can cause rust or discoloration on stainless steel, Rinse these pieces as soon as possible. Starch from foods like potatoes, pasta, rice and oatmeal require more energy to clean than the rest of the load.

Load items so they do not rest over the wash tower lc ed in the center of the lower rack. Avoid blocking the upper and lower spray arms by allowing items to extend beyond the racks. Place glasses in any row of the upper rack for proper ch ing and rinsing. Do not load glasses over the tines.

�

�

Upper

Rack

(Features vary slightly by model.) _ _l __'_J_ ..... .--_.,_ _'__t_ _'_' _,_ 10 Place Settings

Lower

Rack

This rack is designed to hold glasses, cups, small plates, bowls, cookware, etc. Small plates or bowls should be loaded with soiled surfaces facing the center of the rack. Do not load glasses over tines. The Twin Shelf (select models) on the right side of the upper rack folds up or down. Fold it down

(Features vary slightly by model.) Large items may be placed in any convenient location in rack. Keep soiled surfaces facing the center of the rack. The back of this rack accommodates a row of dinner plate two rows of smaller plates. Serving bowls and large pan across the front of the rack or on the left side. Folding tines (select models) located on the right side, i items.

vide loading flexibility for large-shaped

to hold long-handled knives, spatulas and spoons or short items like cups or juice glasses. Fold it up for taller items like bowls, plates, etc.

Removing

the Upper Rack
items |

The upper rack can be removed when tall or oversized need to be loaded into the lower rack.

To remove:
� Roll the upper rack 1/3 to 1/2 of the way out. � Remove the plastic rack stop from the end of each track. To remove each plastic rack stop, push inward (towards the rack) on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Take care to support the track while removing rack stops, � Roll the rack all the way out of the track and remove from the dishwasher. � Reverse the above procedure to replace the upper rack into the dishwasher.

10 Place Settings Removable Utensil (Features vary slightly by model.) Basket

For best cleaning results, prevent items from nesting toge by placing some items in the basket with handles up and s, with handles down. Load knives, handles up, through slots in the covered section when closed (select models). Be sure that thin, finely pointed items do not extend thrc the basket. This could block the lower wash arm.

Rack Stop
/ /

Small, lightweight items like baby spoons and plastic me_ ing spoons should be placed in the covered section (select n els) of the basket for washing.