|
There are currently no product reviews.
 ;
Manual is actually a pack of schematics, good quality pictures.
;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
;
Excelent service, the manual is complete, very cheap and fast
Alberto
CDX-M610 SECTION 3 PHASE ALIGNMENT
3-1. ARM (A-L) ASSY, ARM (B-L) ASSY
4 arm (A-L) assy
5 stop ring 1.5, type-E
2 stop ring 1.5, type-E 1 arm (B-L) assy
3 spring (arm L)
bracket (L) assy
3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the arrow A and the arm (A-L) assy in the direction of the arrow B fully (full open state). 2 Align the hole on the cam (L) with part C and install the cam. 4 Turn the cam (L) clockwise and counterclockwise to verify that both the arms are operated. 3 stop ring 1.5, type-E
hole
cam (L)
C
A
arm (B-L) assy arm (A-L) assy B
23
|
