|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Doubted for buy this manual as it is my first order here and at not have cover image, I assumed would haven't. However, within 24 hs, already possessed the link to download it. The manual are scanned correctly and have all what is needed. Includes adjustments and diagrams of all circuits. Very satisfied.
 ;
Really good quality, аll readable.! Wonderful work shop. I recommend to all!
;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
CDX-M8086ZT ,M8086ZT-91,M8186ZT ,M8186ZT-91
7.2.2 DISASSEMBLY
- Removing the Case and Holder(Fig.19)
1. Remove the six screws. 2. Remove the upper case, lower case and holder.
- Removing the Extension Unit(Fig.20)
1. Remove the one screw. 2. Unbend the two tabs indicated by arrows until straight. 3. Remove the extension unit.
- Removing the Grille Assy(Fig.19)
1. Press the four tabs indicated by arrows and then pull out the grille assy.
- Removing the Main Unit(Fig.20)
1. Remove the two screws and earth. 2. Unbend the tab indicated by arrow until straight. 3. Remove the main unit. NOTE: Connect the extension PCB to the main unit via the connector, with the printing on the connector facing downward.
A
Fig. 20 Fig. 19 NOTE: To prevent screw A from working loose, apply glue between screw A and the main unit when installing the main unit to the CD mechanism unit. Before disconnecting the connector, attach a short pin as illustrated.
49
|
|
|
> |
|
