|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good reproduction (copy) of original manual. Didn't have a parts list, but schematic was completely labeled with parts. Complete instructions on how to adjust mechanical functions of the 8-track deck. Well worth having and at a very reasonable cost.
;
It's a full manual. All the parts are in there. I haven't found the problem yett, but I am working on it; hope I can rebuild the part myself. To make it more secure and unbreakable this time. Because the part has failed several times before and costs a lot to let it be repaired.
Thanks so much for this rich illustrated and parted manual.
;
I downloaded the document. The manual was complete, well scanned and everything was legible. I could zoom in see what I needed to know. There's not much more that you can ask.
;
It was complete service manual with all needed service informations. Thanks.
 ;
El manual esta muy detallado, los numeros de partes y los esquemas de despiece son correctísimos y muy claros, tanto para los técnicos experimentados como para los novatos.
CDX-MG6036ZH
7.1.2 DISASSEMBLY
- Removing the upper case (not shown)
1. Remove the five screws, then remove the upper case.
- Removing the Extension Unit (Fig. 1)
1. Remove the three screws B, then remove the side frame and holder. 2. Remove screw C, screw D and PCB from the connector. 3. Straighten the three currently bent claws, then remove the extension unit.
- Removing the Grille Assy (Fig. 1)
1. Remove the two screws A and the connector, then remove the grille assy.
Fig. 1
- Removing the CD Mechanism Module (Fig. 2)
1. Remove the three screws A, then remove the front frame. 2. Remove the three screws B and two screws C, then remove the damper and holder. 3. Remove the two spring As, spring B and spring C from the hook, then remove the CD mechanism module.
� Precautions on Assembly � Apply spring C (black) to the front side hook. Remaining springs A and B are to be hung on the center hook.
Fig. 2
- Removing the Keyboard PCB (Fig. 3)
1. Remove screws A and B, then remove the switch PCB. 2. Remove the four screws C, then remove the guide. 3. Remove the four screws B and screw A, then remove the keyboard PCB.
Fig. 3
53
|
|
|
> |
|
