|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
More than pleased with my prurchase, very good product for the price.
;
Manual-link came 30 minutes after having paid for an extremely rare (40 years old) item (sony icr-120) and helped me to get the radio rework again. So really good help for me, fast and reliable delivery and -taken that into consideration- a very reasonable price for that service. So thanks again! Mike, Germany
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
INITIALISATION (Important Notice)
When you replace a memory IC (IC802), it is necessary to initialise the IC as following step. 2. Select the desired service item by using the Function button on the remote control handset. 3. Change the data by using the Level + or - button . 4. To return to TV mode press the Recall button on the remote control handset.
A. Initialisation
Press and hold the normalisation button on the remote control handset and press the programme + button P on the TV set. The IC will be initialised automatically to set the following data. User control data Colour : Centre Brightness : Centre Contrast : Maximum Sharpness : Centre Text. Bright : Centre Bass : Centre Treble : Centre Balance : Centre Volume : Step 12 Service data K1 K2 ST ID ATT MAX MIN Manual set data -> +001 -> -001
: +000 : +000 : +000 : +004 : -096 : +010
Service mode description K1, K2 : For adjustment of stereo separation ST ID : Mode setting for A2 stereo judgement +000 : Fast mode +001: Normal mode +002: Fast -> normal mode ATT : Attenuation of FM sound To equalise sound levels between FM and Nicam. MAX : Setting of sensitivity for switching Nicam to FM mode MIN : Setting of sensitivity for switching FM to Nicam mode. SCREEN: For screen adjustment To make one horizontal scanning line.
-> ->
-050 -075
The initialised service data of items K1, K2, MAX and MIN should be modified to the manual set data shown above. For how to modify, refer to next step.
NOTE: The items K1, K2, ST ID and ATT are invalid adjustments for a model which does not have an A2 stereo decoder. The items MAX and MIN are invalid adjustmens for a model which does not have a Nicam decoder. These items allow modifications to the set data, but there is no effect in performance.
B. Service Mode
1. To enter the service mode, press and hold the Function button on the remote control handset and press the programme + button P on the TV set. The following OSD appears on the screen. ADJUST K1 K2 ST ID ATT MAX MIN SCREEN CPU Ver DATA +000 -006 +000 +004 -050 -075 VOL 1.0
-10F7KLV
|
|
|
> |
|
