|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Manuals were delivered promptly and were correct as advertised. No issues with the download link which was provided promptly after everything was processed. Very pleasant experience
;
Paid for service manual & got the download fast - worth a visit if you need a service manual
;
It's the manual, I am searching for. Now I am able to repair my Braun A501.
 ;
Great service manual. Unfortunately on page no. 41 there are some details which i can't read.
;
Wonderful service... doubt that I could have made the repairs to my turntable without this service manual. Great help!
Well worth the price paid!
CORNER ADJUSTMENT 1. Receive cross hatch pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �WIDE�, and select item no. 10 �WIDE 10.P CNR�. 3. Press the LEVEL+ or LEVEL - button to correct the distortion of the vertical line around the corners.
VERTICAL HEIGHT ADJUSTMENT 1. Receive circular pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �WIDE�, and select item no. 5 �WIDE 5.P V-S. 3. Press the LEVEL+ or LEVEL - button to adjust the vertical height.
HORIZONTAL ADJUSTMENT HORIZONTAL CENTRING ADJUSTMENT 1. Receive circular pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �WIDE�, and select item no. 2 �WIDE 2.P H-P�. 3. Press the LEVEL+ or LEVEL - button to adjust the horizontal centre. HORIZONTAL WIDTH ADJUSTMENT 1. Receive circular pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �WIDE�, and select item 6 �WIDE 6.P H-W�. 3. Press the LEVEL+ or LEVEL - button to adjust the horizontal width.
H-BLANK ADJUSTMENT 1. Receive circular pattern . 2. Enter to the service mode and select mode �REGULAR�, and select item no. 7 �REGULAR 7.HBF�. 3. Press the LEVEL+ or LEVEL - button to adjust the centre of picture image to be screen centre.
OSD POSITIONING ADJUSTMENT HIGH-VOLTAGE CONFIRMATION 1. Receive circular pattern and set screen mode to �FULL�. 2. Set controls to normal. 3. Connect high-voltage meter to the anode of CRT and GND. 4. Confirm that voltage is 29.5±1.0kV for 28� model. 30.5±1.0kV for 32� model. 1. Receive circular pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �REGULAR�, and select item no. 8 �REGULAR 8 OSD�. The OSD test bar will appear on the top of screen. 3. Press the LEVEL+ or LEVEL - button to adjust proper OSD positioning. �������������������� VERTICAL ADJUSTMENT VERTICAL CENTRING ADJUSTMENT 1. Receive circular pattern and set screen mode to �FULL�. 2. Enter to the service mode and select mode �WIDE�, and select item no. 1 �WIDE 1.P V-P�. .3 Press the LEVEL+ or LEVEL - button to adjust the vertical centre.
-11C3HAL/C3YAV
|
|
|
> |
|
