SANYO CE32FWH2FC
Service Manual

OPTION SETTING
[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the option data of TV set and service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be performed following setting and �SERVICE ADJUSTMENT� on next page.

Service menu: Video Enter the service adjustment menu as described on the previous page and select �Video� using the PM or PL buttons and then press the F/OK button to enter.

To enter to the Option Mode
+ Press and hold the F/OK button on the remote control and Pw button on the front panel of the TV. The option window will appear on the screen.

ON-TIMER PLUG AND PLAY WELCOME TEXT BBE AUTO VOLUME HEADPHONE CRT 16:9 MODE NOISE REDUCTION COUNTRY

ON ON ON OFF OFF OFF ON OFF UK

VIDO Alignment onfig. hite oint hite oint hite oint ea hite imiter lac evel offset 8 lac evel offset 8 ain prescale Fast blaning dela uma/hroma dela estore default

Use the PM or PL buttons to select the option, then press the F/OK button on the remote control to enter.

Service menu: Sound Enter the service adjustment menu as described on the previous page and select �Sound� using the PM or PL buttons and then press the F/OK button to enter.

OPTION MODE FOR CE32FWH2F-C-00

To set the option mode
+ Highlight the desired option item by using the Pv or Pw button . + To switch the option mode, use the Volume - (LEFT) or Volume + (RIGHT) button. + The data which is set in the option mode is stored into the memory IC automatically. Following table shows the available option items and default setting mode.

Audio enu Audio Te Voume aance oudne Saia eec

Use the PM or PL buttons to select the option, then press the F/OK button on the remote control to enter.

Option Mode
ON-TIMER PLUG AND PLAY WELCOME TEXT BBE AUTO VOLUME HEADPHONE CRT 16:9 MODE COUNTRY

Mode
ON or OFF ON or OFF ON or OFF ON or OFF

Description & Note
On-timer available, default �ON� Plug and Play mode, default �ON� BBE sound mode, default �OFF� Default �OFF� Headphone control , default �OFF� Default �ON� Default �OFF� TV system, default �UK� Display message when first set up, default �ON�

Service menu: TDA9885 Enter the service adjustment menu as described on the previous page and select �TDA9885� using the PM or PL buttons and then press the F/OK button to enter

OFF or ON ON or OFF ON or OFF UK, IRE BG/DK / I / LL�

TDA9885 rie

Use the PM or PL buttons to select the option, then press the F/OK button on the remote control to enter.

NOISE REDUCTION ON or OFF

Service menu: Image Enter the service adjustment menu as described on the previous page and select �Image� using the PM or PL buttons and then press the F/OK button to enter Use the PM or PL buttons to select the different options.

5
Exit from the Service Mode
+ Press the MENU button.

P

8

ADJUSTMENTS MTANT NTE
Do not attempt to adjust the following service adjustments except when adjustments are required in servicing otherwise it may cause loss of performance and product safety.

Note: Some items of the service adjustments for this chassis are controlled by the CPU, IC80, and the adjustments are carried out by using the C handset.

TAE ADJUSTMENT . eceive white raster pattern. . et controls to normal. . onnect digital voltmetre to test point and D. . djust voltage to . y using .

INITIALISATION OF MEMORY IC
To initialise the memory IC (IC803), press and hold the NORMAL button on the remote control, then press the PM button on the front panel of the TV set and then turn the Mains switch Off and On. The initialisation is now completed. When initialised the memory IC and all of the setting data (option data and service adjustment data) stored in the IC are reset to the default value. It is necessary to set the option settings and readjust the service adjustments listed on page 6 and to re-tune all the channels.

TAED ADJUSTMENT . eceive cross hatch pattern and set screen mode to . . nter service menu mage . se the M or L uttons to highlight . . ress the or uttons to adjust trapeium distortion.

A ADJUSTMENT . elect the clearest station . onnect a digital voltmeter to test point and D . nter service menu D . ith the M or L uttons select rite . djust using the or uttons until the readout from the voltmeter is . dc. NE ADJUSTMENT . eceive cross hatch pattern and set wide screen mode to . . nter service menu mage. . se the M or L uttons to highlight . . ress the or uttons to adjust any top corner distortion. . se the M utton to highlight . se the or corner distortion. uttons to adjust any ottom

The available adjustment items are as follows; TDA9885 : This can be adjusted for AGC. Image : This can be adjusted for picture images/shapes. Video : This can be adjusted for the service adjustment. DO NOT ADJUST OTHER SETTINGS

E SAE ADJUSTMENT

[After replacing the Memory IC (IC803)]
The memory IC, IC803, stores the service adjustments data for each circuit, therefore, when the memory IC is replaced, it should be programmed by using �OPTION SETTING� on previous page and the following adjustments.

SEEN ADJUSTMENT . ae sure the set is warm mins . eceive lac and hite picturepattern . nter service menu ideo . elect item hite oint or hite oint . sing the or uttons adjust to mae the white white.

TO ENTER SERVICE ADJUSTMENTS
While pressing the green button on the remote control press the PM on the cabinet front. The service menu appears.

Service SW Vers ..0 Video Sound STV30 TA88 STV806 TA330 Others Image WSS
Use the PM or PL to highlight the service menu you require and press the F/OK button to enter.

ADJUSTMENT ADJUSTMENT . eceive cross hatch pattern and set screen mode to . . nter ervice menu mage . se the M or L uttons to highlight then press the utton to enter.

. ress the or uttons to mae the vertical line ecome straight. HORIZONT TNT HORIZONT NTRIN TNT 1. Set wide screen mode to �FULL�. 2. Preferably receive a circular pattern 3. Enter service menu : Image 4. Use the M or L buttons to highlight �1 P H-P�. 5. Press the or buttons to adjust horizontal centre. HORIZONT ITH TNT 1. Set wide screen mode to �FULL�. 2. Preferably receive a circular pattern 3. Enter service menu : Image 4. Use the M or L buttons to highlight �3 P H-� 5. Press the width. or buttons to adjust horizonal RTI TNT RTI NTRIN TNT 1. Set wide screen mode to �FULL�. 2. Preferably receive a circular pattern 3. Enter service menu : Image 4. Use the M or L buttons to highlight �11 P -P� 5. Press the or buttons to adjust the vertical centre. RTI HIHT TNT 1. Set wide screen mode to �FULL�. 2. Preferably receive a circular pattern 3. Enter service menu : Image 4. Use the M or L buttons to highlight � P -� 5. Press the vertical centre. or buttons to adjust the

TO EIT SERVICE ADJUSTMENTS
Press the Menu button to navigate backwards through the service menus until menus disappear.

IMPORTANT NOTICE o not attempt to adjust service adjustments not listed on the above otherwise it may cause loss of performance and product safety.

HIHOT ONIRTION 1. 2. 3. 4. Set wide screen mode to �FULL�. Preferably receive a circular pattern Set brightness and contrast to ma. onnect high-voltage meter to the anode and . 5. onfirm oltage is 2.5 1. 2 3.5 1. 32