|
There are currently no product reviews.
 ;
I have this hi-fi system for a long time and I need to repair some things. Founding this manual will be very helpfull :)
 ;
It is pretty good. The schematics were covered all components, the manual also provide the parts list . It's useful for the trouble shooting.
 ;
Very fast service, best quality of the service manual and the schematics
 ;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
 ;
Hi, this is a very clear manual, nice copy, not quite up to the standard of the very best available but better than many others. I think the price was especially fair for a hard to find manual and I would certainly use this manual seller again. Recommended.
Ver 1.1 2000. 06
� NOTE FOR INSTALLATION OF THE �BASE, CHANGER� It is important for the CD changer mechanism to ensure a proper alignment between the �gear, tray� and the �gear, tray rock�.
2 There are two types of �gear, tray� available: screw fastening type and rubber fit type. For the rubber fit type of �gear, tray� , fit the rubber in the boss on the �gear, tray� . Do not allow the rubber to project. Take care not to damage the claw. claw rubber
OK
gear, tray
NG
gear, tray gear (C), relay gear, tray rock
gear
pin base, changer
1 Pass a pin of 1.5 mm diameter through the holes in the �gear , tray � and the �gear, tray rock� and align these holes with the hole in the �base, changer�.
� 11 �
|