|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual was very good & was very helpful with repairs.
Always great & fast service from Owner's manual.
;
Very pleased with the quality of the scan. No complaints whatsoever.
 ;
I liked the product. I would use their sevices again.
;
I Recently purchased yet another Service Manual from Owner-Manuals.com, this time for a Sony EVS700ES/UB Videocassette Recorder. The Manual was available for upload within two hours and is an Extremely Good copy, as some of this I was able to enlarge to get even better detail.
Once Again, Very happy with the result!
;
A good and useful manual. With these, We was abled to isolate and pin point the component that was causing the problem. The total time spent in troubleshooting is very much reduced.
CFD-E90L SECTION 2 GENERAL
Basic Operations
This section is extracted from instruction manual.
Playing a CD
3
1, 2
Use these buttons for additional operations
u x ZPUSH OPEN/CLOSE VOLUME +, � Jog dial OPERATE (or POWER)
To adjust the volume
Do this Press VOLUME +*, � (VOL +, � on the remote). Press x. Press u*. Press the button again to resume play after pause. Turn the jog dial clockwise. (On the remote, press >.)
Connect the supplied mains lead.
stop playback pause playback
1
Press ZPUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment.
go to the next track
go back to the previous track Turn the jog dial counterclockwise. (On the remote, press ..) With the label side up remove the CD turn on/off the player * The button has a tactile dot. Press ZPUSH OPEN/CLOSE. Press OPERATE (or POWER).
2
Close the lid of the CD compartment.
3
Press u. The player turns on (direct power-on) and plays all the tracks once.
Display
Track number
Playing time
4GB
5GB
Listening to the radio
1
2
Use these buttons for additional operations
OPERATE (or POWER) MODE VOLUME +, �
Basic Operations
Connect the supplied mains lead.
1
Press RADIO�BAND�AUTO PRESET until the band you want appears in the display (direct poweron). Each time you press the button, the band changes as follows: �FM� t �MW� t �LW�
Display
Tips ¥ If the FM broadcast is noisy, press MODE until Mono appears in the display and the radio will play in monaural. ¥ If you need to change the MW tuning interval.
To adjust the volume turn on/off the radio
Press VOLUME +*, � (VOL +, � on the remote) OPERATE (or POWER)
* VOLUME + has a tactile dot.
To improve broadcast reception Reorient the aerial for FM. Reorient the player itself for MW/LW.
2
Hold down TUNE + or TUNE � until Indicates an FM stereo the frequency digits begin to change broadcast in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can't tune in a station, press the button repeatedly to change the frequency step by step.
for FM for MW/LW
6GB
7GB
4
|
|
|
> |
|
