|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
Precautions (continued)
Notes on CDs � Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out.
Troubleshooting
General
The power is not on. � Connect the AC power cord to the AC IN socket and a wall outlet securely. � Make sure the batteries are inserted correctly. � You cannot turn on the player with the remote when you operate the player on batteries. The power is not on, and �bAttErY� and �Error� are displayed alternately. � Make sure the batteries are inserted correctly. � Replace all the batteries with new ones if they are weak. There is no audio. � Unplug the headphones when listening through speakers. The power is turned off unexpectedly. � Replace all the batteries with new ones. Unusual sound is heard. The sound is noisy, weak or has poor quality. � Replace all the batteries with new ones if they are weak. Noise is heard. � Someone is using a portable telephone or other equipment that emits radio waves near the player. c Move the portable telephone, etc., away from the player.
� Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. � Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be a considerable rise in temperature inside the car. � Do not stick paper or sticker on the CD, nor scratch the surface of the CD. � After playing, store the CD in its case. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking error. Notes on cassettes � Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape.
Side A
CD Player
�no diSC� lights in the display even when a CD is in place. � Place the CD with the label surface up. � The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW with the recording device. � There is a problem with the quality of the CD-R/CD-RW, recording device, or application software. The CD does not play. � Place the CD with the label surface up. � Clean the CD. � Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation.
Tab for side B
Tab for side A
� The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback.
24
 $4.99 CFDG70 SONY
Service Manual Complete service manual in digital format (PDF File). Service manuals usually contains circuit diagr…
|
|
|
> |
|
