Capturing the Screen
If you want to later playback the currently displayed screen, you can save the screen data onto the memory (up to 100 images)*1.
*1 The number of the data that can be saved is different according to the image.
Press Capture button.
The currently displayed screen is saved, and is added at the end of the already-saved images.
Capture Button
Displaying Saved Images
1 Press Menu button. 2 Select [General] - [OfflineView], then
select [OK].
The saved image and the following panel will be displayed. <Panel> Moving to the four corners of the screen Displaying the previous image (high-speed mode) No 016
Total 038
Menu Button Image number The number of images saved Delete the image data Displaying the next image (high-speed mode)
Delete << >> <>
Displaying the next image (The same operation is possible by pressing the Capture button.) Displaying the previous image (The same operation is possible by pressing the R-Button.)
NOTE
When the power is cut by an operation other than pressing the power switch (e.g., when the wireless display is running on battery and the battery is inadvertently taken out, or when the AC adaptor is accidentally pulled out from the power outlet and no battery is in the wireless display), all saved images are lost. Only the screen image is displayed, and operations such as input and selection cannot be performed on the screen. To close an image that has been saved and display the previous screen: 1 Press Menu button. 2 Select [General] - [Connect], then select [OK]. 33
