|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Good Quality of the File.
You get the normal manual is incudet.
;
Very nice and real Service Manual, I didn't thought it actually exist in the real world at all.
 ;
VERY NICE FOR COURTESY AND PRECISION!.
tHE SITE IS VERY IMPORTANT FOR ALL DEVICES
vERY GOOD
;
+++ Is is fine, that was what i looking for. Thanks! +++
;
A very good complete archive, i am very satisfied for document.
7 Troubleshooting
7-2-14 ABL Failure
Symptoms : � Full white luminance is too bright. (ABL minium is over 35 F/L) � Full white luminance is too dark. (ABL maximum is under 35 F/L) � The luminance of full white and No Video are almost same.
Display the full white pattern.
Check connections between CN202 and CN202_2.
No
Does full white luminance vary, adjusting ABL step with Softjig? Yes
Yes
Are full white and white square luminance almost same? No
Does the PWM duty of IC202�s Pin 21 vary adjusting ABL step? No Check and replace IC202 and around parts.
Yes
No
Is R121 right as CRT�s differential items? Yes
Replace R121 to higher or lower one that meets the spec.
Replace it.
Does the voltage of IC101�s Pin 8 vary between full white and No Video?
F/W: 4.1~4.3V No Video: 5.3~6.0V
Yes Check and replace IC101.
No Yes Check and replace D518, IC101.
Does T501�s Pin 8 voltage vary between full white and No Video?
F/W: 1.5~3.0V No Video: 5.5~7.0V
No No
Are 12 V line, R504, L504, Q501 and Q518 ok? Yes Are C509, D514, Q502 and Q506 ok? Yes Check and replace T501 and CRT.
Replace it.
No
Replace it.
7-16
CHA42*7L/5**7L
|
|
|
> |
|
