AEG CHDE6260
Owner's Manual

Metal grease filter
� The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in the external evacuation or internal recycling function. Attention: the metal grease filters must be removed and washed, either by hand or in the dishwasher, every four weeks.

Open the metal grease filter
� Model CHDE 6260:To remove the grease filters, first pull the handles upwards, then extract the filter outwards. Fig. 2a. � Model 335 D:To remove the grease filters, first remove the grid (see Fig. 2a) and take out the grease filters oushing on the locking springs Z. Fig. 2b. Hand washing Soak grease filters for about one hour in hot water with a greaseloosening cleaner, then rinse off thoroughly with hot water. Repeat the process if necessary. Refit the grease filters when they are dry. Dishwasher Place grease filters in the dishwasher. Select most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit the grease filters when they are dry. When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur, this does not have any impact on its performance. � Clean the inner housing using a hot detergent solution only (never use caustic detergents, abrasive powders or brushes).

Z

Fig. 2a

Fig. 2b

42