|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is all I need to check and repair my equipment. Thank you....
;
This manual is all I need to check and repair my equipment. Thank you....
;
This manual is all I need to check and repair my equipment. Thank you....
;
this manual make me repair my vintage radio with easily.
Thank you for your best service
sukpra
;
A good manual. Had everything i needed to make the repair.
CH-X1500 2.5.5 Mounting the front slider and rear slider (See fig.45, 46) (1) Position the unit with the rear side facing down, then rotate the third gear in the direction of the arrow (clockwise) until the lift arm comes to the position at which the holes are exposed. (2) Mount the front slider from the top. Rotate the third gear counterclockwise until the hole of the slider is lined up with the right hole of the stud. (3) Attach the E-washer on the shaft. (4) Position the unit with the front side facing down, then mount the rear slider. Check that the r, s and t positions are correctly mounted as shown in Fig. 46. (5) Rotate the third gear in the direction of the arrow (counterclockwise) until the lifter unit is at the top position.
E-washer Front slider
Stud
Psition so that the stud and right hole are lined up.
Rotate until the holes are lined up.
Set the holes are exposed. Lift arm Fig.45
r
s
t
Lifter unit
Rotate the third gear to move the slider.
Fig.46
1-18
 $4.99 CH-X1500 JVC
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|
