|
There are currently no product reviews.
 ;
Very good scanning quality. All schematics are very legible. Worth every cent !
;
Excellent quality, very quick download turnaround, will definately use again.
 ;
This is a awesome quality scan of the original Service Manual for Technics 8099.
Contains the circuit diagram, PCB layout, adjust/tune instructions as well.
Since this is my first buy here, i'm really glad! This site do works as intended/described, it's definitely not scam!
Мои рекомендации! Все мануалы настоящие!
;
Good Quality of the File.
You get the normal manual is incudet.
;
Very nice and real Service Manual, I didn't thought it actually exist in the real world at all.
CH-X1500RF
2.5.5 Mounting the front slider and rear slider (See fig.45, 46) (1) Position the unit with the rear side facing down, then rotate the third gear in the direction of the arrow (clockwise) until the lift arm comes to the position at which the holes are exposed. (2) Mount the front slider from the top. Rotate the third gear counterclockwise until the hole of the slider is lined up with the right hole of the stud. (3) Attach the E-washer on the shaft. (4) Position the unit with the front side facing down, then mount the rear slider. Check that the r, s and t positions are correctly mounted as shown in Fig. 46. (5) Rotate the third gear in the direction of the arrow (counterclockwise) until the lifter unit is at the top position.
E-washer Front slider
Stud
Psition so that the stud and right hole are lined up.
Rotate until the holes are lined up.
Set the holes are exposed. Lift arm Fig.45
r
s
t
Lifter unit
Fig.46
Rotate the third gear to move the slider.
1-18 (No.49804)
|
