|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
- Safety Precautions
- Instructions
- Location of Main Parts
- Disassembly Method
- Pickup Replacement Procedure
- JC 12 Forced Eject Procedures
- Troubleshooting
- Wiring Connections
- Description of Major IC's
- Block Diagram
- Standard Schematic Diagrams
- Printed Circuit Board
- Parts List
There are currently no product reviews.
 ;
Great tape deck manual!
I'm very positively surprised, because it is a very long manual, lot of pages, drawings, diagrams, description of how to make the alignment and adjustment procedures.
It is as good as the old "Naka" manuals from the 1970's - if somebody have seen them, they know what I mean by that.
I recommend to buy this very much !
;
I am a vintage hifi collector. No way to fix that device without the appropriate service manual...thanks to your site I got it and every thing is easier now. I got the manual right after ordering: fast cheap accurate ... thank you
;
Wonderful job clear. Qick fantastic. These people are really good. If even a problem arise they are wonderful assisting you. These scheme is so net despite this is a very old TV. Thank you for everything!!!!!!!!
;
Detailed schematic diagram, manual for professionals
;
Good service manual,exploded view,adjusment and test point locations,head alignment,mechanical checks and adjusments,all perfect.
Lifter Unit
1. Unhook the elevator spring located on the front side of the unit. (Be sure to first unhook the spring from the lifter side as shown in the upper part of the diagram.) 2. Lift the lifter unit upward, then remove the lower rod to remove the lifter unit from the chassis.
Unhook this part first
Lifter Bracket
1. Remove the two lifter bracket fixing screws (4) located on the back of the lifter unit. 2. Remove the lower rod.
Fig. 21
Proper orientation
Side Bracket and Traverse Mechanism
1. Remove the two side bracket unit fixing screws (5) to disconnect the side bracket unit from the lifter unit. 2. Remove the three shafts on the traverse mechanism assembly from the lifter unit.
Lift up the lifter unit
For reassembling, refer to the reassembling procedures.
Lower Rod
4
Fig. 22
4
Fig. 23
5 Remove from the lifter unit
5
Fig. 24
Remove from the lifter unit
|
|
|
> |
|
