perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Text excerpt from page 8 (click to view)
Mounting of cooker hood in a cupboard, Alt. 1 (Fig. 6):
Cut an opening and drill 4 holes in the underside of
B A C 2 1
the cupboard. Use the template printed on the packaging. � Mount the locknuts (A) on the cooker hood. �Mount the cooker hood with four screws (B) and washers (C).
Fig. 6
Mounting of cooker hood in a cupboard, Alt. 2 (Fig. 7):
Cut an opening in the underside of the cupboard. Use the template printed on the packaging. � Mount the cooker hood with two screws (A) and the spacers (B). � Fit the plastic covers (C).
B A C
Fig. 7
Mounting of cooker hood between cupboards (Fig. 8):
Fit the two brackets (A) on the cooker hood. � Mark out the exact location to drill in the sides of the cupboards. � Mount the cooker hood with four screws (B), washers (C) and the nuts (D).
D A
C
B
Fig. 8
Mounting of cooker hood on wall (Fig. 9):
Mark out where the 4 holes shall be drilled on the wall. Drill in the markings with an �8 mm drill and fit rawl plugs into the holes. Use the template printed on the packaging. � Fix the screws (A). Leave about 5 mm distance between the screws and the wall. � Hook the cooker hood on the screws (A). � Remove the grease filter and mount the screws (B) in the two lower holes. Remove the grease filter by pulling it backwards (against the wall) and then downwards. � Tighten the screws (A). � Mount the grease filter.
36
C A
