|
|
|
Who's Online
There currently are 5987 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was a complete manual as stated. Very good source for older product manuals. Thanks
;
Scan quality is very good. Price is very reasonable. If you're looking to purchase a copy of this manual, this is the one to get.
 ;
Perfect for my use.Could have better pictures,but otherwise perfect ;)
;
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
;
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
10
MAINTENAN(;E
£
CAUTION: Topreventdamageto the cooktop,do not use oversizedcookware.The pan should not be more than one inchlargerthanthe burnergrate. The maximumpanI size is a 1O-inch skillet. J To preventstaining or discoloration,clean cooktop after each use. Wipe acidorsugarstainsas soon as the cooktop has cooled as these stains may discolor or etch the porcelain, To remove: When cool, graspthe twofrontcornersand lift up. Release the sloton the left rear corner of the cooktop flangefrom the tab onthe burner boxwall. Then movethe cooktop toward the left to release the slot on the cooktop flange from the tab on the burner box wall.
CAUTION: Do not operate a surface burnerwithout a pan on the grate.The porcelainfinishon the grate may chipwithouta pan to absorb the intenseheat fromthe burner flame, To install grates: Place grateon cooktop,locatingeach of the fourgrate legson topof the four black plasticgrommets. Press down at each corner to secure burner grate to cooktop.To preventdamageto the grommets,do not press downon allfourcornersat the sametime. Installone sideof the gratethen installthe otherside. _
Slot
To replace: Insert the slot on the right rear corner of the cooktopflange over the tab on the burner boxwall. Lowerthe rear of the cooktop into place, inserting the slot on the left rear corner of the cooktop flange over the tab on the burner box wall. Lower the top into place and apply slight pressure at the two front comers to secure the cooktop in place. Due to certain atmospheric conditions, the cooktop on your appliance may show signs of rust on the underneath side. This is especially true in areas of high humidity and salt air areas. To help eliminate this condition, caution should be taken to make sure that the underneath side of the main top is kept dry. This is especially important in areas of high humidity where moistureaccumulates. If you detect signs of rust, we have found it helpful to spraythe underneath side with a coat of high-heat tested rustolium or silicone paint. CAUTION: Remove top from appliance and spray in a well vented area.
|
|
|
> |
|
