|
There are currently no product reviews.
 ;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
Attachment A
Page 1 of 5
Procedure to fix the Screen VR on FBT of CM771
1.Preparation (1) Solder tool with flat head.(Refer to Photo 1 and 2) 2.Operation (1) Chassis adjustment should be completed. (2) Attach the head of solder tool softly on the right side of Screen VR knob together with FBT body for approximately 5 seconds to melt them. (Refer to Photo 3 and 4) (3) Attach the head of solder tool softly on the left side of Screen VR knob together with FBT body for approximately 5 seconds to melt them. (Refer to Photo 5 and 6) (4) Attach the head of solder tool on the top of Screen VR knob for approximately 7 seconds to melt it. (Refer to Photo 7 and 8) (5) Check Screen VR can not be turned and the G2 voltage is within 600+/-10V.
45
|
