|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Changing the recording level after recording
� S.F Edit
You can change the volume of the recorded tracks using S.F (Scale Factor) Edit. The original track is recorded over at the new recording level. When changing the recording level, you can select Fade-in Recording to gradually increase the signal level at the start of recording, or Fade-out Recording to gradually decrease the signal level at the end of the recording. You cannot change the recording level of the track recorded in MDLP mode.
6 Press . or > repeatedly to select
the track number you want to change the recording level of, and then press ENTER/YES on the remote.
�Level 0dB� appears.
7 While monitoring the sound, press .
or > repeatedly to change the recording level.
The recording level can be adjusted from �12 dB to +12 dB in 2 dB increments. Adjust the recording level so as not to light up �OVER� at the strongest sound.
8 Press ENTER/YES on the remote.
�S.F Edit OK?� appears.
9 Press ENTER/YES on the remote.
�S.F Edit: **%� appears while the track is being recorded. An amount of time that is roughly equal to or longer than the playing time of the track is required when recording over the track. When the recording finishes, �Complete!� appears for a few seconds.
To cancel the operation
Changing the overall recording level of a track
1 Press FUNCTION on the remote
repeatedly until �MD� appears in the display.
2 Press PLAY MODE on the remote
repeatedly until both �PROGRAM� and �SHUF� disappear.
Press MENU/NO on the remote during steps 4 through 8. If you press ENTER/YES on the remote in step 9 and start recording, you cannot interrupt the operation.
3 Press MENU/NO on the remote to
display �Edit Menu.�
4 Press . or > repeatedly until �S.F
Edit?� appears in the display, and then press ENTER/YES on the remote.
5 Press . or > repeatedly until �Tr
Level?� appears in the display, and then press ENTER/YES on the remote.
40
|
|
|
> |
|
