|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
 ;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
;
Manual correct, and complete. Downloads cleanly. Format of manual was presumably difficult to PDF to A4, but works reasonably well.
;
This was a hard to find manual. When I did find it , some sites wanted way too much for the file.
Owner-manual .com had it for a really reasonable price. Not only that but it was sent very quickly and was a quality scanned document, unlike some others I purchased from a different site.
Good job guys!!
Larry
;
Fast and courteous service. Product delivered as described. Thank you.
�
SAFETY PRECAUTIONS
HOW TO LIGHT CONSTANT STANDING PILOTS (This information is NOT for ranges equipped with Pilotless Ignition). Be sure Oven Temperature Control and Surface Burner Controls are OFF before _ _,_ HOW TO ADJUST CONSTANT STANDING PILOTS FOR SURFACE BURNERS ONLY 1. Remove cooktop. Locate top burner and pilot adjusting screw. (a) Adjusting screw is to the LEFT
Surface pilots. lighting Burner Pilots: Raise and support on the _ cooktop metal rod. Holda lighted match near the
MANIFOLD°ftheovenc°ntr°lonthepIPE. 2_ Insert a small screwdriver into the adjusting screw and turn screw to the right or left until the flame on the pilot is _A-inch in height. 3. Replace cooktop.
= "-
ILL
_
Oven Pilot: Remove oven racks and loosen screws securing insulated oven bottom. Do not remove screws, but slide screws back and remove oven bottom. With the Oven Control knob/dial set in the "OFF" position, hold lighted match to the pilot located at the far end of the oven burner. When pilot is lighted, replace the oven bottom and oven racks. Be sure to secure the two screws located at the front of the oven bottom.
_
_
j,° � o*
,<, 7
.
7
|
|
|
> |
|
