|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
VAA37001-R.3664.A
CAM BARREL �Lubricate the groove, the contact surface and the sliding surface of the cam ring with the oil MZ-800S. Then, set the cover ring unit.
Convex section
Cover ring unit
Oil: MZ-800S To groove, contact surface and sliding surface of cam ring
Cam groove
Cam barrel
FIXED BARREL â� Lubricate the groove (3 places), the contact surface and the sliding surface of the fixed barrel [#612] with the oil MZ-800S. â�¡ Pass the shutter FPC through the hole of the fixed barrel [#612]. Fit the convex section of the cam barrel [#613] to the cam groove of the fixed barrel [#612] and set them to each other.
Cam barrel [#613]
Oil: MZ-800S To convex section
Oil: MZ-800S To groove, contact surface and sliding surface of the fixed barrel
Fixed barrel [#612] Cam groove
- A7ï½¥ E7600 -
|
