|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The manual was very accurate for the part that I was changing, I was able to order the correct part and had no issues with the replacement procedure. However, I was expecting to have more detailed repairs for the lower drive unit.
 ;
I needed the manual immediately and I got it immediately. I couldn't find this manual anywhere else on the net. The site was easy to traverse, and the price was very reasonable. I'll definitely be back for any future needs.
;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
;
Perfect like it was descriped, Perfect like it was descriped
� �Revision)
Note: When the �rmware is updated without replacing the CP-1 PCB, follow the procedure shown below. Work procedure
VAA47001-R.3674.A
� Turn camera off and connect the AC adapter. � Insert the updating SD card into the camera. � Set the mode dial to �SETUP� and turn power on. � Select and decide �Firmware version� to access the �rmware updating menu. (Fig. 1)
(Fig.1) � Select �Yes� and press the [OK] button to execute upgrading the �rmware. (Fig. 2)
Note: Do NOT turn power off during writing.
(Fig.2) � When the display showing that updating of �rmware is completed appears on the screen, turn off the power and take the SD card
out of the camera. (Fig. 3)
(Fig.3) � Turn on the power and check the version on �Firmware version� of the menu. (Fig. 4) � Turn off the power. Updating is completed.
����
�Fig.4�
��課
ï¼
Oct.5.2005 Revision page��� 1 - A38 ･ P2 -
|
|
|
> |
|
