|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
;
Excellent, fast delivery, excellent product. Good luck!
;
This manual is for the usa model only. But it is clear
, accurate and comprehensive, including board layouts and schematics.
I found it extremely useful for my mitsubishi dp-86da, but the same diagram would also work for the realistic lab5000 and hi fi 80. Thanks.
a2
First, fix one end of the earthing wire to the iron part of the power board. See the location indicated on the diagram (a1). Then, fix the other end of the earthing wire in the location indicated on diagram (a2).
a1
Affix the power board, and secure a washer and screw in the location indicated on the diagram.
30
Pass the wire through the slot in the lamp board as indicated in the diagram.
CP-RX60(C12XM)
Place the slot of the lamp board onto the power board, and secure it in the location indicated on the diagram using two screws.
32
Use of M4 screw. Use of crow washer. Attach the fan, and secure two screws in the locations indicated on the diagram.
After arranging the wire as shown in the diagram, fasten it in the location indicated in the diagram. Secure it in place using one screw.
Fasten the wire in the location indicated on the diagram, and secure it with two screws. Attach a magnet.
Attach the black mylar to the location indicated in the diagram.
Wiring diagram 2 (C12XM)
|
|
|
> |
|
