|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
 ;
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
Best regards.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
CP-SX5500W
Air Filter Replacing the Air Filter
Replace the air filter if contamination cannot be removed, or if it is damaged. 1. Remove the filter lid. 2. Pull and remove the old filter from the filter box. 3. Insert the new filter to the filter box. Push left and right edges of the filter with fingers in order to fit the filter to the box properly. Check that there is no gap between the filter and plastics at top, left and right side edge of the filter. 4. Set the filter lid.
CP-SX5500 Filter box
Filter Lid
Filter
Please clean with a vacuum cleaner.
Cleaning the air Filter
The air filter should be cleaned as described below at intervals of approximately 300 hours. 1. Switch the projector power supply OFF, and remove the power cord from the power outlet. 2. Clean the air filter with a vacuum cleaner. Option Air filter: MN03701 CAUTION Switch power OFF and remove the power cord from the power outlet before beginning maintenance work. Please read the separate �SAFETY INSTRUCTIONS� thoroughly to ensure that maintenance is performed correctly. Replace the air filter if contamination cannot be removed, or if it is damaged. Contact your dealer in such case. Do not use the equipment with the air filter removed. When the air filter is clogged with dust etc. the power supply is switched OFF automatically to prevent the temperature rising inside the projector.
22
|
|
|
> |
|
