|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
;
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
 ;
Useful manual, good scan, worth the pay if you find the unit difficult to operate.
;
Exactly as described, the full user-manual (145 pages). Perfect.
� Changer
Display CD � CHsE1s CD � CHsE2s Cause � Either the disc is dirty, or upside down. � There is a scratch on the disc. Check/Remedy Check the disc. (The changer automatically switches to the next disc.) Press [<] on the changer. If the changer does not respond, press the changer�s reset switch. Load discs in the changer or magazine.
E N G L I S H 48
CD � CHsE3s
The changer will not operate for some reason. There are no discs in the changer or magazine.
NO DISC
Notes � The number of the disc that is the cause of the error is sometimes displayed before �E1� or �E2�. � Depending on the changer, the information that is displayed and the remedy may sometimes differ in part. For details, refer to the User�s Manual provided with your changer.
Troubleshooting Tips
� Common
Symptom The power does not come on. Remedy � Turn the ignition switch to �ON� or �ACC�. � Connect the cords correctly. � Replace the fuse. � Turn muting off. � Connect the cords correctly. � Wait until the condensation clears. � Change the display to something other than demo mode and then try again. � Set the MUTE/ATT to �OFF�. Press [POWER] and turn the power on before attempting to set the clock. Page = 62j65 66 53 62j65 = 26 53 26
The unit produces no sound. The buttons do not work.
Cannot set the clock.
� Remote Control
Symptom Remedy � Insert the batteries correctly. � Make sure that the batteries are of the correct type. � Replace the batteries. � Point the remote control at the remote control sensor labeled �REMOTE�. Page 22 22 22 =
Pressing the buttons has no effect.
CQ-DVR909U
67
|
|
|
> |
|
