|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
;
This is the correct service manual of SHARP RX-100H(BK) DAT.
5 Disassembly and Assembly Instructions
5.1. How to Remove the Flexible PCB
Disassembly of Display Unit
Front Panel . Remove the two screws( ) from the Front Panel. Monitor 1. Pull out the Monitor to the arrow direction.
Front Panel
Monitor 2. After removing the two screws ( remove the Plate. ) and one screw ( ),
2. After removing the screw ( the Connector Cover.
) from the bottom side, remove
Connector Cover 3. Disconnect the FFC (CNP3), which is connected to the Front Panel, from CN707 on the Main PCB (E-3173Aa).
Plate 3. After removing the four screws ( ), remove the Monitor Ass'y.
Front Panel
CN707 Slide Mechanism Ass'y (Monitor Ass'y) FFC (CNP3) 4.Remove the Front Panel. 4. Disconnect the FPC Ass'y from CN452 on the TFT PCB (E-9939A).
FPC Ass'y Front Panel CN452
10
|
|
|
> |
|
