perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 48 (click to view)
Setting the Clock�Continued
Setting the Clock Manually
The time can be displayed in either 12- or 24-hour format.
STANDBY/ON Number button TIMER / CLOCK CALL DISPLAY MENU/NO/ CLEAR ENTER
7
Use the Previous and Next [ ]/ [ ] buttons to set the time. You can also use the remote controller�s number buttons to enter the time.
For the 12-hour format, use the remote controller�s [>10] button to select AM or PM.
8
Press [ENTER].
1
Press the [TIMER] button repeatedly until �Clock� appears.
The clock is set and the second dot starts �ashing.
Displaying the Day and Time
2
Press [ENTER].
To display the day and time, press the remote controller�s [CLOCK CALL] button. If the CD receiver is on Standby, the time is displayed for 8 seconds.
3
Use the Previous and Next [ [ ] buttons to select �Manual Adjust.�.
]/
Using the 12- or 24-hour Format
To change the time format between 12-hour and 24-hour, while the time is shown on the display, press the [DISPLAY] button.
Displaying the Time in Standby Mode
4
Press [ENTER].
To set the CD receiver so that the time is displayed while its on Standby, turn on the CD receiver, and then press and hold its [STANDBY/ON] button for 2 seconds. Note that having the time displayed in Standby mode will consume a little more power.
5
Use the Previous and Next [ ]/ [ ] buttons to select the day of the week. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.
6
Press [ENTER].
To cancel the Manual Adjust function at this point, press the [MENU/NO] button.