|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
The cellular phone and Bluetooth cannot be connected.
Check enter in a set screen of the telephone
NG
Check the power of IC901 (Bluetooth module)
NG
Confirm to IC901 (Bluetooth module) IC502 (the power of 3.3V)
OK Confirm to IC901 (Bluetooth module) the circuit of Q101,102,104,105,106,107,108
OK
Check how to connect by inquiry from the cellular phone
NG
OK
Check the link of Bluettoth steady or the BT mark on
Confirm to IC901 (Bluetooth module) the circuit of Q101,102,104,105,106,107,108 ANT902 (Bluetooth module) Confirm to IC901 (Bluetooth module) the circuit of ANT902 (Bluetooth module)
NG
OK Confirm to connect Bluetooth with the cellular phone again
The receiving talk voice doesn't go out of the speaker.
Check connect it with the cellular phone
NG
Confirm to IC901 (Bluetooth module)
OK Check the sound of CD or radio OK
Check the call sound come to send it by telephone
Confirm to NG IC402 (DSP), IC501 (AMP), IC503 (Power AMP), J502 (Connector)
OK
Check the power of IC901 (Bluetooth module)
OK
NG
Confirm to the circuit of IC502 (the power of 3.3V) Confirm to the circuit of IC502 (the power of 3.3V) Confirm to the circuit of IC101 (CODEC) IC901 (Bluetooth module)
OK Check the power of IC101 (CODEC) OK Check the waveform of 9pin of IC101 OK
Check the waveform of 43pin of IC402(DSP)
NG
NG
NG
Confirm to the circuit of IC402 (DSP)
OK Confirm to the output of J502
-7-
PN-3000P PP-3000M
|
|
|
> |
|
