|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Thanks you very much for this "hard to find" service manual.
Will help a lot in repairing this tuner.
 ;
I have this hi-fi system for a long time and I need to repair some things. Founding this manual will be very helpfull :)
 ;
It is pretty good. The schematics were covered all components, the manual also provide the parts list . It's useful for the trouble shooting.
 ;
Very fast service, best quality of the service manual and the schematics
 ;
This service manual of the old video cassette recorder VT-LC50EM is very good readable even the tiniest numbers (i.e. IC-pins). The circuits are very clear. Many details of the schematic are very good described but in GERMAN language. Many schematic details - but complete at all. Common background information of several details are enclosed and physical knowledge of the TFT liquid crystal display for example. The manual lacks PCB drawings. If you understand german I would recommend this manual for you.
PRACTICAL SERVICE FIGURE
< TUNER SECTION >
< FM SECTION >
IHF Sensitiviy: (THD 3%) Signal to Noise Ratio: (Input 60dB) Distortion: (Input: 60dB) (Input: 120dB) Auto stop level: Stereo separation: Intermediate frequency: Less than 18dB (at 76/87.5, 83/98, 108MHz) Mono: More than 66dB Stereo: More than 65dB Less than 2% (at 98MHz) Less than 3% (at 98MHz) 28dB±8dB (at 98MHz) More than 25dB (at 98MHz) 10.7MHz
< AM/MW SECTION >
Sensitivity: (S/N 10dB) Less than 48dB (at 600/603kHz) Less than 46dB (at 1000/999kHz) Less than 44dB (at 1400/1404kHz) More than 30dB (at 600/603, 1000/999, 1400/ 1404kHz) Less than 3% (at 1000/999kHz) Less than 10% (at 1000/999kHz) Less than 60dB (at 1000/999kHz) 450kHz
Signal to Noise Ratio:
Distortion: (Input: 74dB) (Input: 75dB) Auto stop level: Intermediate frequency:
< LW SECTION > (EZ model only)
Sensitivity: (S/N 10dB) Less than 60dB (at 153kHz) Less than 56dB (at 198kHz) Less than 52dB (at 288kHz) More than 30dB (at 153/198/288kHz) Less than 3% (at 198kHz) Less than 70dB (at 198kHz)
Signal to Noise Ratio: (Input 80dB) Distortion: (Input: 80/120dB) Auto stop level:
< DECK SECTION >
Tape speed: Wow & flutter: Take-up torque: FF&REW torque: Distortion: S/N ratio: 3000Hz±60Hz Less than 0.3% (R.M.S) 30-60g-cm (FWD) 55-140g-cm Less than 5% (REC/PB, 1kHz) More than 35dB (PB, AC, DC) More than 25dB (REC/PB, AC, DC) Less than 45mV (PB, VOL MAX) More than 45dB TTA-100 TTA-602 (NORMAL) TTA-615 (HIGH POSITION)
Max Noise level: Erasing Ratio: Test tape:
31
|
|
 |
> |
|