|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Dear Sirs,
Thank you for the fast support, the manual does provide all necessary information to repair the radio. All schematics are in a good quality for reading.
The manual fits 100% to my requirements as a technican.
Kind regards Thomas
;
the big video recorder format s-vhs many features delicate in loading system of the cassette. Such machines are no longer manufactured, it would be too expensive.
 ;
THIS MANUAL IS VERY GOOD AND VERY CLEAR
PLEASE NOTE IT DOES NOT CONTAIN THE SETUP INFORMATION TO ALIGHN THE GEARS IN THE CD MECH IT DOES SHOW ALL THE PARTS AND THEIR LOCATIONS .
;
Complete service and operation manual. All schematics are there, all circuit boards AND add-on boards. Including exploded views ,component names and specifications. Also electrical and mechanical adjustment procedures are in this manual. This manual also covers the more advanced BR-S811E unit. Scan quality is fair and usable.
;
High quality scan of original Service Manual. Everything´s fine!
Alignment and Adjustments
3-3-11 White Balance Adjustment
3-3-11 (A) SCREEN ADJUSTMENTS
1. Input a TOSHIBA pattern. 2. Check R506 �G� pin on the CRT PCB with an oscilloscope. 3. Enter the Horizontal Line Mode. 4. Adjust the Screen Control on the FBT so that the waveform of the 21st line is DC 2.0 (+0.5)V. _ SIZE DC 29� 2.0 26� 2.4 22� 2.4
3-3-11 (D) SUB-BRIGHTNESS ADJUSTMENT
1. Input a TOSHIBA pattern. 2. Set SBT so that the brightness level in lowlight is 1.0 F/L.
<TOSHIBA PATTERN> High-Light
Low-Light
3-3-11 (B) HIGH-LIGHT ADJUSTMENT 3-3-11 (E) SUB-COLOR ADJUSTMENT
1. NOTE : If a color analyzer is not available, then approximate the following color adjustments �by eye�. 2. Input a TOSHIBA pattern. 3. Set high-light to 290/300 (X,Y) with a color analyzer. 4. Set low-light to 1.0F/L ( 22� low-light 1.2F/L). 5. Adjust RG, BG and set GG to step 32. 29� HEIGHT LIGHT 37 _ 3 + 26� 45 + 3 _ 22� 45 + 3 _ Set �SCR� in the Service Mode to step 0.
3-3-11 (F) SUB-TINT ADJUSTMENT
Set �STT� in the Service Mode to step 10.
3-3-11 (G) VERTICAL SIZE ADJUSTMENT
1. Input a lion head pattern. 2. Set VS to 32 in the Factory Mode. 3. Set VA so that the top margin is 4.0. Adjust SL so that the bottom margin is 4.0. If the top and bottom margins are different, adjust VA so that their sum is 8.0.
3-3-11 (C) SUB-CONTRAST ADJUSTMENT
1. Set SCT so that the brightness level in highlight is 37 F/L (for a 29� SCREEN).
3-3-11 (H) HORIZONTAL SHIFT ADJUSTMENT
1. Input a lion head pattern. 2. Adjust �HS� in the Service Mode so that the left and right margins of the lion head pattern are 5.0 + 0.5 : CT633BW/CT683BW, 6.3 + 0.5 : _ _ CT566BV/CT566BW/CT567BW/ CT568BW/CT766DW
3-10
Samsung Electronics
|
|
|
> |
|
