ZANKER CTF950
Owner's Manual

IF SOMETHING DOESN'T WORK ?
Problems The wash results are not as usual Solutions Check that : was the wrong quantity or the wrong detergent added ? Insufficient detergent leads to grey washes and scale deposits in the machine. Check the quantities more exactly. were special stains pre-treated ? were programme and temperature correctly chosen ? Check that : the water pression is sufficient. the pump filter is not obstructed. there has not been a power breakdown. Check that : the water pression is sufficient. the pump filter is not obstructed. the mains fuse is intact. there is not a rinse hold ending a washing programme for delicate laundry (see the programmes chart page 30). Check that : the mains fuse is intact. the appliance is plugged in,. the lid is firmly shut. the programme selector dial is correctly positioned. the beginning of the programme has been ordered (EIN/AUS pushbutton pushed on). there has not been a power breakdown. Check that : the drain hose is not squashed or bent. the drain filter is not clogged. Check that : the inlet water hose is opened and the water pression is sufficent. the lid of the appliance is closed. there has not been a breakwater. Check that : all the transit bolts and packing have been removed. all the feet resting firmly on the ground, the lock nuts have been secrured. the machine does not touch something. the load is sufficent.

The washing cycle is very much too long.

The washing machine stops during a washing cycle.

The machine does not start up

The machine does not drain and/or does not spin

The machine does not fill

The machine vibrates or is too noisy

34