PANASONIC CU2C24DKU
Owner's Manual

� Operation Details
TIMER � Use the ON timer to turn on the air conditioner at the desired time. This will give you a cooled environment, e.g. when you return from work or wake up. � When the ON timer is set, operation will start 15 minutes before the actual set time. � Use the OFF timer to stop air conditioner operation at the desired time. This can save electricity while you are going out or sleeping. � The set timer will repeat daily once it is set. � If there is a power failure, you can press the SET button to restore the previous setting once the power resumes. � If the timer is cancelled, you can restore the previous setting by pressing SET button.

HOW TO OPERATE
Timer

1
Select ON or OFF timer.

2
ECONOMY

Set the desired time.

3
CANCEL
Cancel the selected timer.

Con�rm the setting.

� Ensure the clock on the remote control has been set correctly. � You can set both the ON and OFF timers at the same time. � To cancel either the ON or OFF timer, press then press .
Hints
� �

or

,

Press CLOCK button for more than 10 seconds to change the time format - from AM/PM format to 24 hour format. For your convenience, you can set the air conditioner to operate automatically by using both ON and OFF timer.

Troubleshooting
� �

TIMER indicator always on. POWER indicator is blinking 15 minutes before ON timer is activated.

� Timer is activated and the setting will repeat itself daily. � The unit is determining the operation mode by sensing the room temperature. This happens when it has been set to AUTO operation mode.

6