Actually, I was looking for this information for 3 years!...now thanks to you, the manual is on my hands and of great help, cause I understand now where I was doing wrong connections and wires...excellent, I'll be back to you if in need, thank you.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
Text excerpt from page 1 (click to view)
LYT0002-0V1A
INSTRUCTION
ENGLISH
CU-V602J
Be sure to consult your nearest JVC dealer when attaching the metal brace to the ceiling.
1. POSITION THE CAMERA LENS
Point the lens towards the side which has the video and audio output terminals.
Terminal
2. CHECK THE METAL BRACE POSITION
Before attaching the metal brace to the ceiling, first attach the camera to the metal brace to check the correct metal brace position. If a desirable metal brace position is not possible, attach the provided spacer around the bolt projecting from the metal brace.
Lens
Direction of the lens
Screw hole ø8 mm
3. ATTACH THE METAL BRACE
Select a section of ceiling which is made of material which will enable screws to be securely tightened. Place the metal brace on the ceiling so that the bolt projecting from it is positioned in the direction opposite of the camera lens. Align the screw* with the hole located on the metal brace, and screw it into the ceiling. Repeat for all 3 screws*. Make sure that the metal brace is firmly attached to the ceiling. * Use appropriate commercially available screws.
ø4.5 mm
Bolt
4. ATTACH THE CAMERA TO THE
METAL BRACE
Align the camera�s mounting socket with the bolt projecting from the metal brace. Then rotate the camera until the bolt is securely screwed into the mounting socket.
Align the camera�s mounting socket with the projecting bolt, then screw in until tight.
5. CONNECT THE CABLE TO THE
CAMERA
Use the provided AC Power Adapter and AV cable (20 m). Make sure that the cord is firmly connected to the terminal.
