A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
Text excerpt from page 7 (click to view)
HOW TO EXCHANGE THE DUST BAG
�TAKING OUT THE DUST BAG
1. Remove the plug from the electrical outlet. Open the bag compartment lid by pulling the bag compartment clamp as shown in Fig18. 2. To remove the dust bag 22 supported by the bag holder, push down the top end 23 of the bag holder, then pull it out carefully.
23 22
Fig. 18
Fig. 19
�FITTING THE NEW DUST BAG
1. Insert the bottom of the cardboard collar 24 into the collar support 25 of the dust receptacle, and push the top edge until it catches behind the lug 26 of the bag holder. 2. To replace the bag compartment lid, first insert the projection of the lid into the groove on the cleaner and push into place. 3. Make sure you always have available spare paper bags. The HITACHI PAPER BAG has been made especially for your cleaner. Paper bags may be purchased from your local dealer or from a HITACHI service center. In the event that replacement bags(or drive belts) are not available at your local shops, for where to buy please contact 01628 643000. NOTE:To avoid using the cleaner without the paper bag, the clamp system of your cleaner prevents the bag compartment lid from being clamped when the paper bag has not been replaced, or has not been set properly in place. NOTE:Put the bottom end of the paper bag into the bottom of the bag compartment so that the bottom end of the paper bag could not be caught between the bag compartment lid and the cleaner.
