|
There are currently no product reviews.
 ;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
CVP09FR
29.Remove wiring connectors of the compressor cord by using longnose pliers.(3 parts) Then turn the band to the direction, as shown in below figure. CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION WHEN RE-ASSEMBLYING.
CAUTION: DISCHARGE THE FAN MOTOR CAPACITOR AND RUNNING CAPACITOR BEFORE TOUCHING THESE CAPACITORS OR OTHER COMPONENTS OR WIRING. 30.Unscrew 2 screws holding the control box. Remove the control box from the unit.
33.Move the band to the direction shown in below figure (approx.11/ 16"). Then removed the drain hose B.
34.Unscrew the screw holding the lead wire. 31.Unscrew 6 screws holding the casing cover. Remove the casing cover from the unit.
35.Turn the band, as shown in below figure. CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION WHEN RE-ASSEBLYING. 32.Unscrew 4 screws holding the orifice. Remove the orifice from the unit. Move the band to the direction of the arrow(approx.11/16"), and removed the drain hose A.
3�6
|
