|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Message
Solution
Error No.
28
Error Description
During the CGMS picture (possible a record once) input. (Disc which there is not for the correspondence to VR Format CPRM) Disc Protected Disc. There is no it in a space field. It is recorded a 99 title. (Video Format Disc) It is recorded a 99 title. (VR Format Disc) There is 999 number of total chapter. (VR Format Disc) There is not a space to a record field of control information. PCA Full. (in REC start) It is done Finalize. (Video Format Disc) Access to Memory Area range outside. Sector Address is wrong. BUP writing error of chapter editing.
Priority
12
This program is not allowed to Insert a ver.1.1 CPRM be recorded on this disc. compatible DVD-RW disc. This disc is protected and not recordable. Disc is full. (No area for new recording) You cannot record more than 99 titles on one disc. (The maximum is 99.) You cannot record more than 999 chapters on one disc. (The maximum is 999.) Release the disc protect setting in the Disc Setting menu. Insert the recordable disc with enough recording space. Delete unnecessary titles.
29 30 31 32
7 5 7 8 9 10
Delete unnecessary chapter markers.
33 34
You cannot record on this disc Delete unnecessary titles. as Control Information is full. You cannot record on the disc as Power Calibration Area is full. This disc is already finalized. Insert a new disc. Release the finalizing for this disc. Repeat the same operation.
35 36 37
4 6 -
Can not record on this disc.
38 39
If an error occurs during the timer recording, one of the following error numbers (40 to 42) or the above error messages (error number: 1 to 39) is displayed on the recording menu after timer recording. (Once the timer programming list with error indication is displayed, the program line(s) with error will be cleared only after the programs are cancelled and reset to the timer standby mode.) (In the case of the error occurs during setting the timer programming, no error messages is displayed.)
Timer Programming
Date Start End CH
VCR DVD
DVD VCR
Speed
*
2. 3. 4. 5. 6. 7. 8.
JAN/01 ---------------
12:57AM
1:57AM 8
DVD
E40
The speed mode changes to the error number.
A program with the error number is grayed out and asterisked on the timer programming list.
Message
Solution
- Set the timer programming correctly. - Set the timer programming before the start time. - Insert a recordable videotape with a record tab. Turn the power on and set the clock correctly then set timer programming again. Insert the recordable disc.
Error No.
Error Description
- Some portion has not been recorded because of program overlapping.
Priority
40
- Recording did not start at the start time. - No Videotape is inserted. Videotape ran out during recording.
-
Error message is not displayed.
41 42
Power failed No disc when recording
-
1-10-3
E9601FIS
|
|
|
> |
|
