|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
Disassembly and reassembly
3-2 Main Board Removal
3
1 2
11 4 13
8
5 7
12 6 9 10
1. Separate the TBC-wire 2P connector from GT501,GT502. 2. Separate the CRT Assembly from the CRT socket. 3. Remove the Anode Cap from the CRT. 4. Separate the D-Coil Connector from CN802. 5. Separate the AC cord from CN801. 6. Separate the DC connector from CN401. 7. Separate the CN501B 8P CRT connector from CN501. 8. Separate the CNA05 5P A/V side connector from CN602. 9. Separate the CNA01 8P CRT connector from CN701. 10. Separate the Focus Screen Wire from the FBT clamper. 11. Separate the TBC wire 2P, speaker wires from the wire clamper. 12. Separate the CN701, CN602 connector from the wire clamper. 13. Separate the AC cord from the wire clamper. 14. Remove the main board by pulling it with both hands.
3-2
Samsung Electronics
|
|
|
> |
|
