|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
fast and easy and exactly what I was looking for. Not the cheapest but value for money after all.
;
The manual for the Sansui P-L75 was not one of the more informative turntable manuals around but for $5 it was helpful enough.
;
VERY GOOD SERVICE.FAST ANS VERY HONEST PRICE .RHAANK HERNAN
 ;
Thanks to this service manual I repaired my old camcorder! The manual perfectly explains how to disassemble the camcorder step by step.
;
This manual is very useful because it presents the technical specifications of the cd player, including the manufacturer of the reader, this helps if you need to replace it. It also displays the settings and layout of the circuit.
CX-JN3 SECTION 4 TEST MODE
MC COLD RESET � The cold reset clears all data including preset data stored in the RAM to initial conditions. Execute this mode when returning the set to the customer. Procedure: 1. In the standby status, while pressing the x button, press the [POWER] button. 2. The set is reset, then becomes standby status. GC TEST MODE Procedure: 1. Press the [POWER] button to turn the power on. 2. While pressing the x button, press the [POWER] button for 5 seconds. 3. It change displays in order of model type, version and suffix at 2 seconds interval, then the display is back to normal status. AMP TEST MODE Procedure: 1. In the status where AC plug is disconnected, while pressing the [VIDEO/AUX] button, connect the AC plug to turn the power on. Then enter the AMP test mode and display �AMP TEST�. 2. If turn the [VOLUME] knob clockwise, it displays �VOLUME MAX�, and if turn the knob counterclockwise, it displays �VOLUME 0�. 3. If the [TREBLE] and [BASS] knobs are turned clockwise or counterclockwise, it change displays in order of �EQ MAX�, �EQ MIN� and �EQ FLAT�. 4. To release from this mode, disconnect the AC plug and turn the power off. DISC TRAY LOCK Procedure: 1. Press the [POWER] button to turn the power on. 2. While pressing the x button, press the [ Z OPEN/CLOSE] button for 5 seconds. 3. The message �LOCKED� is displayed and the tray is locked. (Even if exiting from this mode, the tray is still locked) 4. To release this lock, while pressing the x button, press the [ Z OPEN/CLOSE] button for 5 again. 5. The message �UNLOCKED� is displayed and the tray is unlocked. CD REPEAT 5 LIMIT CANCEL MODE � Number of repeat for CD playback is 5 times when the repeat mode is �REPEAT�. This mode enables CD to repeat playback for limitless times. Procedure: 1. Press the [POWER] button to turn the power on. 2. In the repeat on status, while pressing the x button, press the [CD] button to enter the CD repeat 5 limit cancel mode and repeat mark blinks on the fluorescent indicator tube. 3. To release this mode, press the [POWER] button to turn the power off. CHANGE-OVER OF AM TUNER STEP BETWEEN 9 kHz AND 10 kHz (Except AEP, UK and CIS models) � A step of AM channels can be changed over between 9 kHz and 10 kHz. Procedure: 1. Press the [POWER] button to turn the power on. 2. While pressing the [TUNER] button, press the [POWER] button to the display on fluorescent indicator tube changes to �AM 530 kHz� (10 kHz step) or �AM 531 kHz� (9 kHz step), and thus the channel step is changed over. FUNCTION CHANGE MODE � Select either TV, VIDEO or AUX (MD) of the external function input. Procedure: 1. Press the [POWER] button to turn the power on. 2. While pressing the [VIDEO/AUX] button, press the [POWER] button. 3. Each time this operation is operated, it change displays in order of �TV�, �VIDEO� and �AUX�.
17
|
|
|
> |
|
