BLAUPUNKT Calgary CD30
Owner's Manual

CD MODE
CD mode
You can use this unit to play standard CDs with a diameter of 12 cm. Risk of damage to CD drive! So-called �CD singles� with a diameter of 8 cm and contoured CDs (�shape CDs�) are not suitable for playback in this unit. We accept no liability for any damage to the CD drive that may occur as a result of the use of unsuitable CDs.

Random play (MIX) � Press button 4 (MIX) =.
�MIX CD� will appear briefly in the display, MIX will light up in the display. The next randomly selected track will then be played. Stopping MIX

� Press button 4 (MIX) = again.
�MIX OFF� appears briefly in the display and MIX no longer lights up.

Scanning tracks (SCAN)
You can briefly play all the tracks on a CD.

Switching to CD mode
q

If no CD is inserted in the drive.

� Gently insert the CD with the
printed side uppermost into the CD compartment until you feel some resistance. The CD will be drawn automatically into the drive. Do not use force when inserting the CD. You must not hinder or assist the drive as it draws the CD in. Once inserted, CD playback begins immediately.
q

� Press button 5 (SCAN) =.
Note: You can set the scanning time. Stopping SCAN and continuing playback

� To stop scanning, press button
5 (SCAN) = again. The current track will then continue to be played.

If a CD is already inserted in the drive.

� Press the CD�C button 8 until
�CD� appears in the display. Playback begins from the point at which it was last interrupted.

Setting the scantime � Press the MENU button <.
�MENU� appears in the display.

� Keep pressing the

Selecting a track � Press the
or button : to select the next or previous track.

button : until �SCANTIME� appears in the display. the and buttons :.

� Set the required scantime using � When you have finished making
your changes, press the MENU button <.

If the button : is pressed once, the current track will be heard again from the beginning. 12