Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Text excerpt from page 20 (click to view)
Operating Instructions
Countdown
The countdown operates independently and can therefore be set when the oven is switched on as well as switched off. Setting the Countdown 0 1. Press the �CLOCK� C button. 2. Set the time required within 5 seconds using the + and buttons. When the time set on the countdown has expired, an acoustic signal sounds for approx. two minutes. 3. Press the �CLOCK� C button to switch off the signal. Changing the Setting on the Countdown 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. 2. Set the new time required within 5 seconds using the + or - buttons. Switching Off the Countdown Early 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. 2. Within 5 seconds set the time required to "0" using the - button. Checking the Countdown Setting A few seconds after the countdown has been set, the time display indicates the current time again. You can check the amount of time left on the countdown at any time. 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. The time remaining on the countdown is displayed.
Changing the Signal Tone
The frequency of the signal tone can be set to 3 different tones. 0 1. Press the - button until the changed signal tone sounds and release. The frequency is set to the next level. 2. Press the - button again until the changed signal tone sounds and release. The frequency is set to the next level.