Being a user of older radios of many kinds, preferring them over more modern rigs, this manual was invaluable in the programming of my two. I now know for certain what the assorted buttons functions are, and am very grateful to have found this excellent site. Many thanks for your assistance, Tony.
5 star quality on these downloadable manuals. Easy to read and all the information is there. A must when doing a custom install or needing to service your precious old school electronics.
So usefull to make my installation a breeze. 5 stars on quality.
Text excerpt from page 20 (click to view)
Operating Instructions
Countdown
The countdown operates independently and can therefore be set when the oven is switched on as well as switched off. Setting the Countdown 0 1. Press the �CLOCK� C button. 2. Set the time required within 5 seconds using the + and buttons. When the time set on the countdown has expired, an acoustic signal sounds for approx. two minutes. 3. Press the �CLOCK� C button to switch off the signal. Changing the Setting on the Countdown 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. 2. Set the new time required within 5 seconds using the + or - buttons. Switching Off the Countdown Early 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. 2. Within 5 seconds set the time required to "0" using the - button. Checking the Countdown Setting A few seconds after the countdown has been set, the time display indicates the current time again. You can check the amount of time left on the countdown at any time. 0 1. Using the �CLOCK� C button, re-select the time set on the countdown. The time remaining on the countdown is displayed.
Changing the Signal Tone
The frequency of the signal tone can be set to 3 different tones. 0 1. Press the - button until the changed signal tone sounds and release. The frequency is set to the next level. 2. Press the - button again until the changed signal tone sounds and release. The frequency is set to the next level.
